Biber 110
10. January 2021
Eschlböck Spaltbiber Spaltbetrieb
Spaltbiber
12. January 2021

Biber Trucks

If you need a lot of power with a long reach, choose an Eschlböck truck. With all-wheel drive, with integrated transfer case, with conveyor belt: we have the right solution for your needs in our program!

divider_red
 

Variants

Specifi-
cations

  • Chipper: Biber Modell
  • Axel configuration
  • Truck - power unit
  • Biber Powertruck transmission
  • Driving power
  • Cylinder capacity
  • Automatic gearbox
  • Maximum speed
  • Rear axel stearable / liftable
  • Wheelbase
  • Eschlböck cooling system
  • Central lubrication
  • hydraulic fan
  • TOP conveyor belt
  • Spaltbiber
  • Weight, app.*

Victor

  • 84
  • 6x4
  • Volvo
  • 550 HP/
    404 kW
  • 16 liters
  • 80 km/h
  • - / -
  • 3,9 m
  • -
  • 26.000 kg

RBZ

  • 83,84
  • 6x6
  • MAN
  • -
  • 510 HP/
    375 kW
  • 12,4 liters
  • -
  • 80 km/h
  • - / -
  • 3,6 m
  • -
  • -
  • 26.000 kg

* depending on the equipment ● Series ○ additional equipment at extra cost

 
 

Videos from Biber Trucks


 

Efficient

Lots of power and a long reach

BPT technology

The power transmission of the Biber Powertruck technology developed by Eschlböck enables a high power transmission from the truck engine to the chipper with lowest fuel and CO² consumption at the same time.

Automatic transmission

The chipper is driven by a sinlge-stage transmission positioned between the truck engine and the truck automatic transmission. The power is provided directly to the chipper. This saves fuel and the automatic transmission is protected.

Fast and comfortable

The wood chipper can reach the place of use quickly and comfortable with up to 80 km/h travel speed.


Vican

The Biber Power Truck VICAN is equipped with an intermediate gearbox specially developed for the chipping operation and only available from Eschlböck, which is installed between the truck engine and the automatic transmission. This forms the basis for more power, efficiency and comfort in chipping operation: full power reduction without losses due to intermediate drives, a powershift clutch and the chipping rotor does not have to be disengaged for moving the vehicle in driving mode.

The VICAN chassis is a Volvo FH 16 with 750 hp drive power and 3,550 Nm torque. The tridem chassis ensures full utilization of the 32 tons and the Power Truck can therefore be registered without a special permit. An 8x4 drive brings the full engine power from first gear to the first two rear axles. All functions for the chipping operation can be controlled from the operator station. Chipper and crane by means of the Best Control control system from Eschlböck and the two crane joysticks.

The proven Eschlböck cooler concept is also installed in the VICAN: Easy to clean and a constant cooling is guaranteed here. The crane was specially developed by Eschlböck in cooperation with Palfinger Epsilon and assembled from proven components. The S110F 104 has a reach of 10.4 m, which is further extended by the off-center mounting position. This overall concept allows the VICAN to powerfully showcase its 750 hp in every chipping operation.

Eschlböck Biber 92 BPT Holzhackmaschine
Eschlböck Biber 92 BPT Holzhackmaschine
Eschlböck Biber 110 BPT Holzhackmaschine
Eschlböck Biber 92 BPT Holzhackmaschine

Vican

The Biber Power Truck VICAN is equipped with an intermediate gearbox specially developed for the chipping operation and only available from Eschlböck, which is installed between the truck engine and the automatic transmission. This forms the basis for more power, efficiency and comfort in chipping operation: full power reduction without losses due to intermediate drives, a powershift clutch and the chipping rotor does not have to be disengaged for moving the vehicle in driving mode.

The VICAN chassis is a Volvo FH 16 with 750 hp drive power and 3,550 Nm torque. The tridem chassis ensures full utilization of the 32 tons and the Power Truck can therefore be registered without a special permit. An 8x4 drive brings the full engine power from first gear to the first two rear axles. All functions for the chipping operation can be controlled from the operator station. Chipper and crane by means of the Best Control control system from Eschlböck and the two crane joysticks.

The proven Eschlböck cooler concept is also installed in the VICAN: Easy to clean and a constant cooling is guaranteed here. The crane was specially developed by Eschlböck in cooperation with Palfinger Epsilon and assembled from proven components. The S110F 104 has a reach of 10.4 m, which is further extended by the off-center mounting position. This overall concept allows the VICAN to powerfully showcase its 750 hp in every chipping operation.

Eschlböck Biber 92 BPT Holzhackmaschine
Eschlböck Biber 92 BPT Holzhackmaschine
Eschlböck Biber 110 BPT Holzhackmaschine
Eschlböck Biber 92 BPT Holzhackmaschine
SpecificationsVican
Chipper: Biber Modell92,110
Axel configuration8x4
Truck - power unitVolvo
Biber Powertruck transmission
Driving power750 HP/551 kW
Cylinder capacity16 liters
Automatic gearbox
Maximum speed80 km/h
Rear axel stearable / liftable● / ●
Wheelbase3,7 m
Eschlböck cooling system
Central lubrication
hydraulic fan
TOP conveyor belt
Spaltbiber
Weight, app.*32.000 kg

* depending on the equipment
● Series
○ additional equipment at extra cost


Victor

The VICTOR offers compact dimensions with short overhangs and various rear superstructures. At the same time, it offers sufficient power reserves.

professional chipping operation

dynamic – intuitive – powerful

Compact 3-axle chipper

550 hp for superior power development on the road and sufficient power reserves in chipping operation

Driving comfort due to large cabin and air-conditioned comfort seats

Safety at work combined with technical monitoring

Ease of operation thanks to intuitive chipper control and numerous assistance systems

Unique selling point thanks to loss-free power transmission and short design

Eschlböck Biber 84 BPT Holzhackmaschine
Eschlböck Biber 84 BPT Holzhackmaschine
Eschlböck Biber 84 BPT Holzhackmaschine

Victor

The VICTOR offers compact dimensions with short overhangs and various rear superstructures. At the same time, it offers sufficient power reserves.

professional chipping operation

dynamic – intuitive – powerful

Compact 3-axle chipper

550 hp for superior power development on the road and sufficient power reserves in chipping operation

Driving comfort due to large cabin and air-conditioned comfort seats

Safety at work combined with technical monitoring

Ease of operation thanks to intuitive chipper control and numerous assistance systems

Unique selling point thanks to loss-free power transmission and short design

Eschlböck Biber 84 BPT Holzhackmaschine
Eschlböck Biber 84 BPT Holzhackmaschine
Eschlböck Biber 84 BPT Holzhackmaschine
SpecificationsVictor
Chipper: Biber Modell84
Axel configuration6x4
Truck - power unitVolvo
Biber Powertruck transmission
Driving power550 HP/404 kW
Cylinder capacity16 liters
Automatic gearbox
Maximum speed80 km/h
Rear axel stearable / liftable- / -
Wheelbase3,9 m
Eschlböck cooling system
Central lubrication
hydraulic fan
TOP conveyor belt-
Spaltbiber
Weight, app.*26.000 kg

* depending on the equipment
● Series
○ additional equipment at extra cost


Marox

MAROX is the new chipper with Biber Powertruck technology based on MAN. The latest model from Eschlböck is equipped with the new EURO 6d engine generation and impresses with its 6x6 axle configuration and off-road capability.

Also important for the operator is driving with automatic transmission. The Biber Powertruck technology installed by Eschlböck enables driving and chipping from the operator’s station and ensures fuel-saving effective energy use in chipping.

Eschlböck Biber 84 BPT Holzhackmaschine
Eschlböck Biber 84 BPT Holzhackmaschine
Eschlböck Biber 84 BPT Holzhackmaschine

Marox

MAROX is the new chipper with Biber Powertruck technology based on MAN. The latest model from Eschlböck is equipped with the new EURO 6d engine generation and impresses with its 6x6 axle configuration and off-road capability.

Also important for the operator is driving with automatic transmission. The Biber Powertruck technology installed by Eschlböck enables driving and chipping from the operator’s station and ensures fuel-saving effective energy use in chipping.

Eschlböck Biber 84 BPT Holzhackmaschine
Eschlböck Biber 84 BPT Holzhackmaschine
Eschlböck Biber 84 BPT Holzhackmaschine
SpecificationsMarox
Chipper: Biber Modell84,84,92
Axel configuration6x6 / 8x8
Truck - power unitMAN
Biber Powertruck transmission
Driving power510 HP/375 kW
Cylinder capacity12,4 liters
Automatic gearbox
Maximum speed80 km/h
Rear axle stearable / liftable- / -
Wheelbase3,9 m / 2,98 m
Eschlböck cooling system
Central lubrication
hydraulic fan
TOP conveyor belt-
Spaltbiber
Weight, app.*26.000 kg

* depending on the equipment
● Series
○ additional equipment at extra cost


RBZ

The RBZ series is a classic from Eschlböck, based on the proven MAN TGS 6x6 chassis with 510 hp. With the quality of the chopped material and its off-road capability – coupled with a compact design – many contractors became leaders in biomass production with an RBZ.

Eschlböck Biber 84 RBZ
Eschlböck Biber 84 RBZ Holzhackmaschine
Eschlböck Biber 84 RBZ Holzhackmaschine
Eschlböck Biber 84 RBZ
Eschlböck Biber 84 RBZ Holzhackmaschine
Eschlböck Biber 84 RBZ Holzhackmaschine

RBZ

The RBZ series is a classic from Eschlböck, based on the proven MAN TGS 6x6 chassis with 510 hp. With the quality of the chopped material and its off-road capability – coupled with a compact design – many contractors became leaders in biomass production with an RBZ.

Eschlböck Biber 84 RBZ
Eschlböck Biber 84 RBZ Holzhackmaschine
Eschlböck Biber 84 RBZ Holzhackmaschine
Eschlböck Biber 84 RBZ
Eschlböck Biber 84 RBZ Holzhackmaschine
Eschlböck Biber 84 RBZ Holzhackmaschine
SpecificationsRBZ
Chipper: Biber Modell84
Axel configuration6x6
Truck - power unitMAN
Biber Powertruck transmission-
Driving power510 HP/375 kW
Cylinder capacity12,4 liters
Automatic gearbox-
Maximum speed80 km/h
Rear axle stearable / liftable- / -
Wheelbase3,6 m
Eschlböck cooling system
Central lubrication
hydraulic fan-
TOP conveyor belt-
Spaltbiber
Weight, app.*26.000 kg

* depending on the equipment
● Series
○ additional equipment at extra cost

 
 

Contact us