Biber 84
The most comfortable solution. For everything

Specifi-
cations
- Power source
- Chassis
- Max. wood diameter
- Max. woodØ with blade system (hard wood)
- In-feed width
- No. of knives or blade system
- Chain belt in-feed length to roller
- Power required via PTO shaft
- Rotational speed of PTO shaft
- Power requirement from engine
- Hydraulic swinging drawbar
- Turntable
- Loading crane
- Spaltbiber
- Transport dimensions l x w x h (m)*
- Weight app. (kg) *
84
Z/ZK
- PTO
- Tandem drive axle
- 60 cm
- 45 cm
- 122 cm
- 10 or 20
- 2,05 m
- from 150 kW
- 1000 rpm
- -
- -
- -
- - / ●
- ○
- 5,9 x 2,5 x 3,9
- 13.500 / 16.000
84
Truck
- HGV-Engine
- HGV 6x6
- 60 cm
- 45 cm
- 122 cm
- 10 or 20
- 2,05 m
- -
- -
- HGV
397 kW - -
- -
- ●
- ○
- 8,3 x 2,5 x 4,0
- 25.000
84
S
- additional engine
- Tandem drive axle
- 60 cm
- 45 cm
- 122 cm
- 10 or 20
- 3,1 m
- -
- -
- from 331 kW
- ●
- -
- -
- ○
- 9,6 x 2,5 x 3,7
- 18.000
84
RBM
- additional engine
- HGV 8x8
- 60 cm
- 45 cm
- 122 cm
- 10 or 20
- 1,7 / 2,4 / 3,1 m
- -
- -
- from 331 kW
- -
- ●
- ●
- ○
- 2) x 2,5 x 4,0
- 2)
* Depending on the fittings ● Standard model ○ Optional extra available at extra cost
Model variants: Z: Drive for power take-off shaft / ZK: Power take-off shaft and crane / RBZ: Truck engine drive / S: with motor on trailer with swinging drawbar / All-in-one device RBM or RM variant: wood chipper mounted on a frame to be installed on top of the customer’s vehicle
2) depending on the variant chosen
Videos from Biber 84
Perfect chipping
The proven Eschlböck chipping rotor is designed to be easy to pull and particularly power-saving. With chopping knives or blades, you get exact fine chopped material and coarse chopped material, depending on the knife setting and screen size.
Optionally, the Biber 84 can be equipped with the K2 rotor for even coarser wood chips.
Safe on the road
The compact design without excess width and with standard weight guarantees easy road approval for a good ride throughout Europe.
Outstanding road holding, standard all-wheel drive (AN), and ideal weight distribution.
Good-natured and safe handling well into the limit range.
Hydraulic blower
As an option, the Biber 84 is equipped with a hydraulic blower that is continuously speed-adjustable – independent of the chipping rotor. It thus optimizes the chipping flow for reduces wear and best chipping quality.
High-strength hardfacing in the cutting area.
Precise chipping jet
The 5,2 m high discharge is ideal for direct filling of high trailers.
It is hydraulically height-adjustable in a range from 2,6 m to 5,2 m. The overflow flap allows the chipping jet to be diverted upwards or downwards, filling the storage area right into the last corner.
Biber 84 Z/ZK
The Biber 84 Z/ZK is mounted on a tandem drive axle and is driven by the tractor’s power take-off shaft.




Specifications | 84 Z / ZK |
---|---|
Power source | PTO |
Chassis | Tandem drive axle |
Max. wood diameter | 60 cm |
Max. woodØ with blade system (hard wood) | 45 cm |
In-feed width | 122 cm |
No. of knives or blade system | 10 or 20 |
Chain belt in-feed length to roller | 2,05 m |
Power required via PTO shaft | from 150 kW |
Rotational speed of PTO shaft | 1000 rpm |
Power requirement from engine | - |
Hydraulic swinging drawbar | - |
Turntable | - |
Loading crane | - / ● |
Spaltbiber | ○ |
Transport dimensions l x w x h (m) * | 5,9 x 2,5 x 3,9 |
Weight app. (kg) * | 13.500 / 16.000 |
* Depending on the fittings
● Standard model
○ Optional extra available at extra cost
Model variants: Z: Drive for power take-off shaft / ZK: Power take-off shaft and crane / RBZ: Truck engine drive / S: with motor on trailer with swinging drawbar / All-in-one device RBM or RM variant: wood chipper mounted on a frame to be installed on top of the customer’s vehicle
Biber 84 Truck
The RBZ series is a classic from Eschlböck, based on the proven MAN TGS 6x6 chassis with 510 hp. With the quality of the chopped material and its off-road capability – coupled with a compact design – many contractors became leaders in biomass production with an RBZ. With the Biber Powertruck, Eschlböck set another milestone in chipper technology: a single-stage transmission for maximum power!






Specifications | 84 Truck |
---|---|
Power source | HGV-Engine |
Chassis | HGV 6x6 |
Max. wood diameter | 60 cm |
Max. woodØ with blade system (hard wood) | 45 cm |
In-feed width | 122 cm |
No. of knives or blade system | 10 or 20 |
Chain belt in-feed length to roller | 2,05 m |
Power required via PTO shaft | - |
Rotational speed of PTO shaft | - |
Power requirement from engine | HGV 397 kW |
Hydraulic swinging drawbar | - |
Turntable | - |
Loading crane | ● |
Spaltbiber | ○ |
Transportdimensions l x w x h (m) * | 8,3 x 2,5 x 4,0 |
Weight app. (kg) * | 25.000 |
* Depending on the fittings
● Standard model
○ Optional extra available at extra cost
Model variants: Z: Drive for power take-off shaft / ZK: Power take-off shaft and crane / RBZ: Truck engine drive / S: with motor on trailer with swinging drawbar / All-in-one device RBM or RM variant: wood chipper mounted on a frame to be installed on top of the customer’s vehicle
Biber 84 S
The Biber 84 S is mounted on a tandem drive axle and is driven by its own engine. Pivot drawbar, slewing ring or crane are available as options.





Specifications | 84 S |
---|---|
Power source | additional engine |
Chassis | Tandem drive axle |
Max. wood diameter | 60 cm |
Max. woodØ with blade system (hard wood) | 45 cm |
In-feed width | 122 cm |
No. of knives or blade system | 10 or 20 |
Chain belt in-feed length to roller | 3,1 m |
Power required via PTO shaft | - |
Rotational speed of PTO shaft | - |
Power requirement from engine | from 331 kW |
Hydraulic swinging drawbar | ● |
Turntable | - |
Loading crane | - |
Spaltbiber | ○ |
Transport dimensions l x w x h (m) * | 9,6 x 2,5 x 3,7 |
Weight app. (kg) * | 18.000 |
* Depending on the fittings
● Standard model
○ Optional extra available at extra cost
Model variants: Z: Drive for power take-off shaft / ZK: Power take-off shaft and crane / RBZ: Truck engine drive / S: with motor on trailer with swinging drawbar / All-in-one device RBM or RM variant: wood chipper mounted on a frame to be installed on top of the customer’s vehicle
Biber 84 RBM
The Biber 84 RBM is a Biber 84 mounted on a truck and powered by an auxiliary engine.



Specifications | 84 RBM |
---|---|
Power source | additional engine |
Chassis | HGV 8x8 |
Max. wood diameter | 60 cm |
Max. woodØ with blade system (hard wood) | 45 cm |
In-feed width | 122 cm |
No. of knives or blade system | 10 or 20 |
Chain belt in-feed length to roller | 1,7 / 2,4 / 3,1 m |
Power required via PTO shaft | - |
Rotational speed of PTO shaft | - |
Power requirement from engine | from 331 kW |
Hydraulic swinging drawbar | - |
Turntable | ● |
Loading crane | ● |
Spaltbiber | ○ |
Transport dimensions l x w x h (m) * | 2) x 2,5 x 4,0 |
Weight app. (kg) * | 2) |
* Depending on the fittings
● Standard model
○ Optional extra available at extra cost
Model variants: Z: Drive for power take-off shaft / ZK: Power take-off shaft and crane / RBZ: Truck engine drive / S: with motor on trailer with swinging drawbar / All-in-one device RBM or RM variant: wood chipper mounted on a frame to be installed on top of the customer’s vehicle