For accurate chipping
• Infeed reliable, ergonomic und functional
• Tested and certified with the German “Geprüfte Sicherheit” certification mark
• SPC control with mode selection for desired quality of wood chips and drive power of the tractor
• Chipping length adjustment with guide plate selectable from 1 – 3 cm
• High quality hydraulic components
• Secondary knife for accurate wood chip production
• Built-in sharpening system
• 3 types: three-point, travelling axis and variant with engine (360° rotable and each fixable in working position by 45°)
Specifications | Three point hitch | Travelling axis | Engine |
Chipping system | Disc wheel | Disc wheel | Disc wheel |
Max. wood diameter | 21 cm | 21 cm | 21 cm |
in-feed width | 24 cm | 24 cm | 24 cm |
Knives | 3 pieces | 3 pieces | 3 pieces |
Chip length | 1-3 cm | 1-3 cm | 1-3 cm |
Secondary knife for exact fine wood chips | ● | ● | ● |
Hydraulic tank | 35 litres | 35 litres | 35 litres |
Power required via PTO shaft | from 30 to 80 kW | - | |
Rotational speed of PTO shaft | 540 – 1000 U/min | - | |
Engine diesel | - | - | 32 or 46 kW (Hatz-Silent) |
Grinding device | ● | ● | ● |
Prolongation ejection tube | ○ | ○ | ○ |
Weight ca.* | 1.080 kg | 1.270 kg | 2.400 kg |
Transport position l x b x h (m)* | 2,61 x 1,55 x 2,43 | 3,75 x 1,92 x 2,45 | |
Working position l x b x h (m)* | 2,61 x 1,55 x 3,22 | 3,75 x 1,92 x 3,25 |
● serie ○ optional extra available at extra cost * depending on the fittings
all information without obligation, modifications possible














